MHIGH PRESSURE SCREW-TO-CONNECT COUPLING, AISI 316 CONNECT UNDER PRESSURE
|Art. No.||Body Size||Lp||Hp||T|
|Art. No.||Body Size||Ls||Hs||cH||T|
This serie is general purpose couplings that connect under pressure for high pressure applications. The 1/4" stainless steel coupling connects together with a threaded brass sleeve. Polyurethane seals resist extrusion and abrasion. Mainly used in off-shore equipment and hydraulic lines in corrosive environments. Rated pressure up to 10,000psi and 17,000psi intermittent pressure,small diameter mating seal keeps separate forces to a minimum,allowing easier threaded connection and disconnection at pressures up to 5,000psi. self-locking threads guard against accidental disconnection Visual connection indicator--when fully coupled, sleeve edge is flush with the end of the male thread standard end configuration is female pipe thread
● Body sizes: 1/4"
● dust caps and plugs available
PARKER 1141 SERIES,SNAP-TITE H SERIES
● TEMPERATURE RANGE
With standard seals: polyurethane seal
On request seals: polyurethane or other seals.
● MAX. WORKING PRESSURE
1/4" body :700Bar(10150PSI)
|Rated Connect-Under-Pressure Capability(PSI)||5,000|
|Temperature Range(Polyurethane seals)||-22oC to +230oF|
|Vacuum Test||20 in/Hg|
|Torque to connect at1000 PSI||47 in/lbs|
Coupler Body :AISI 316 STAINLESS STEEL
Plug Body :AISI 316 STAINLESS STEEL,BRASS
Valve :AISI 316 STAINLESS STEEL
Springs :AISI 302
Seals :Polyurethane Seal
Back-UP Ring :PTFE
Only plug and socket with the same thread fit together.
Plastic dust caps and plugs available.
Among those professional 241 series manufacturers and suppliers in China, Ningbo E.H Hydraulic Co.,Ltd is waiting for you to purchase its products made in China in stock.